C.Scope SGA3 Signal Generator
£438 exc. VAT
Available on back-order
“C.Scope MXT Signal Transmitter” has been added to your basket.
£438 exc. VAT
Available on back-order
The C.Scope SGA3 is a 33kHz Signal Generator designed for use alongside the CXL3 or DXL3 Cable Avoidance Tools to optimise performance and enable the detection of more buried utilities.
The C.Scope SGA3 is an affordable Signal Generator designed for use alongside a CXL3 or DXL3 Cable Avoidance Tool to make the task of cable avoidance far more effective. The C.Scope SGA3 will optimise the performance of the Cable Avoidance Tool enabling operators to locate more buried utilities including street lighting cables.
A C.Scope SGA3 Signal Generator is a vital accompaniment to a C.Scope CXL3 and DXL3 Cable Avoidance Tool and significantly increases the number of buried services that can be detected and reduce the day-to-day risk of cable strikes.
The SGA3 is a 33kHz Signal Generator designed for use alongside the CXL3 or DXL3 Cable Avoidance Tools to optimise performance and enable the detection of more buried utilities.
TWO SIGNAL APPLICATION TECHNIQUES
The 33kHz SGA3 Signal Generator can energise a buried metal pipe or cable either by ‘direct connection’ to the target pipe or cable or the simpler ‘induction’ method from above ground.
PULSED/CONTINUOUS SIGNAL OUTPUT
A Pulsed or Continuous signal output allows operators to switch to the Pulsed Mode at the push of a button in high interference situations and keep on tracing.
The SGA3 has a clear audible signal output to indicate when it is in operation.
A useful in-built audio mute control is also included.
ROBUST AND DURABLE CONSTRUCTION
The SGA3s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.
ACCESSORY TRAY
The SGA3 Signal Generator has a large detachable accessory tray as its base. It can house not only the standard accessories (Direct Connection Leads, Earth Stake, Connection Magnets, 10m Auxiliary Earth Lead) and the Instruction Manual but also many of the optional extras such as Signal Clamps, Sondes and Signal Injectors.
THREE YEAR WARRANTY
The SGA3 comes with a three year Warranty (conditions apply).
High and Low switchable Power Output
33kHz Signal Output
Pulsed or Continuous Output Signal
Audio Speaker Mute
Two Signal Application Techniques: Direct Connection, Induction
In-built Accessory Tray
Fully weatherproof design to IP65
Three year warranty (conditions apply)
Induced Output | 32,768Hz |
Connected Output | 32,768Hz |
Carrier Pulse Frequency | 7.5Hz (pulsed mode) |
Audio Pulse frequency | 3.75Hz (pulsed mode) |
Dimensions (with Accessory storage compartment) | 360mm x 180mm x 230mm (14.1” x 7” x 9”) |
Battery Type | Internal 4 x ‘D’ (LR20) cells |
Battery Life | 40 hours intermittent use at 20ºC (68ºF) using alkaline cells |
The C.Scope SGA3 Signal Generator includes the generator, earth stake, direct connection leads and alkaline batteries.
Delivery would usually be within 2 days, subject to pre-delivery checks, destination and cleared payment.
All instruments are supplied fully calibrated with a certificate of conformity.
Please refer to our standard terms and conditions for more information.
Head Office
Jaques House
Fircroft Way
Edenbridge
Kent
TN8 6EL
West Office
Champion House
Wella Road
Basingstoke
Hampshire
RG22 4AG